How To Build A Kicker Ramp For Scooter?
Building a kicker ramp for your scooter is a great way to get some air time and practice your tricks. With a few simple materials, you can build a sturdy ramp that will last for years. In this blog post, we'll show you how to build a kicker ramp for scooter step by step.

First, you'll need to gather the following materials:
- Two sheets of plywood
- One sheet of Masonite or similar material
- Four eight-foot lengths of two-by-four lumber
- Construction adhesive
- Nails or screws
- (optional) Carpeting or grip tape for the ramp surface
Once you have all of your materials, you're ready to start building!
Step one: Cut the plywood and Masonite into the following pieces:
-Two rectangles that are four feet wide by eight feet long (these will be the sides of the ramp)
-One rectangle that is four feet wide by six feet long (this will be the base of the ramp)
-Two triangles that are four feet wide by four feet long (these will be the kickers)
Step two:
- Assemble the sides of the ramp.
- Place one of the four-foot by eight-foot rectangles on a flat surface.
- Apply construction adhesive to one end of each eight-foot length of lumber, and attach them to the edges of the plywood rectangle.
- Repeat this process with the other sheet of plywood and remaining lengths of lumber to create a second side panel.
Step three:
- Attach the kickers.
- Apply construction adhesive to the top edge of each kicker, and attach them to the inside edges of the side panels so that they form a triangle shape.
- Make sure that the kickers are evenly spaced and aligned with each other.
Step four: Attach the base. Apply construction adhesive to the bottom edge of the base panel, and attach it to the inside edges of the side panels. The base should be flush with the bottom edges of the side panels.
Step five: (optional) Add carpeting or grip tape to the ramp surface. This will help prevent your scooter from slipping when you're riding it.
And that's it! Your ramp is now complete and ready for use. Go out and practice your tricks! With a little practice, you'll be pulling off some big air in no time. Thanks for reading!
Also learn how fast do typically people go on a kick scooter
How long should a kicker ramp be?
The length of your kicker ramp will depend on the size of your scooter and how much air you want to get. A good rule of thumb is to make the ramp at least half as long as your scooter. For example, if your scooter is two feet long, you'll want to make your ramp at least one foot long.
If you're just starting out, we recommend building a smaller ramp to begin with. You can always make a bigger ramp later if you find that you need more air.
Comments
Post a Comment